Benelli M4 Shotgun Full Length Tactical Rail Systems

6 and 8 Round Quick Detach Shell Holders are currently out of stock.

These rail systems include the full length tactical rails with integrated forward rails. The forward rails sit at the 9 and 3 o'clock positions and provide plenty of room for gripping the forend.
The newest feature of the full length rails is the low profile picatinny rail. We took a mil standard M1913 rail and reduced the rail by 0.1" to make our low profile top rail. By doing this, the front site post is fully visible; therefore, a channel is not needed down the center of the top rail. This creates more surface area to securely mount optics and red dots. Any device that will mount to a mil standard M1913 picatinny rail will fit on the low profile top rail.
The other great feature of all our Benelli M4 rails is the proprietary docking point for our Quick Detach Shell Holders. This is located on the side opposite the ejection port, on the receiver end of the shotgun. Unlike other shotgun rail systems and shell holders, the quick detach shell holder allows quick access to the trigger takedown pin as well as the ability to quickly change load requirements without using any tools. The shot shells can be mounted from either the top or bottom of the shell holder and do NOT need to be removed on a regular basis to maintain the integrity of the shell holder.
The rails are more complex and with more features that are friendly to the shooter. Great care has been taken to provide a top quality product for a top quality shotgun.
The forward rails on the Full Length system sit close to center line, allowing for a good grip on the forend. Also, the Full Length system has a choice between mid length or extended length forward rails. If the user just wants to mount a light, the shorter forward rail (mid length) would be ideal. Many like the extended length as they can mount the 2 Round Forward Shell Holder just above the ejection port. This makes it quick to load those rounds into the shotgun.

Advantages Benelli M4 Tactical Rail Systems

Low profile top rail allows full view of the front site
Installation is less than 10 minutes
No gunsmithing required
Replaces the factory rail on the Benelli M4 shotgun, using the factory fasteners and washers
Field strip the shotgun without any tools
Finished with a mil spec Type III hard black anodize
Compatible with the quick detach side saddles

Specifications of the Full Length Picatinny Rail Systems

Full Length Rail with Mid Length Rails: width 2.22", length of forward rails 4" and 9 recoil stops, weight 10.8 ounces, length 14.5"
Full Length Rail with Extended Length Rails: width 2.22", length of forward rails 5.98" and 14 recoil stops, weight 11.9 ounces, length 14.5"

Quick Detach Shell Holder

The Quick Detach Shell Holders can only be used on our Benelli M4, Mossberg, and Remington products due to the proprietary dock.
The Quick Detach Shell Holder uses a slide-locking system that gives the user the ability to remove the shell holder body in seconds with no tools. Removing the shell holder simply requires pushing down on the lock bar and sliding the shell holder body back 1/2" on the slide.

Advantages of the Quick Detach Shell Holders

Quick access to the trigger take down pin
Finished with a Type III hard black anodize
Multiple shell holders can be staged with different load requirements
The shell holders are easier and quicker to remove for safer storage of the shotgun
Used for 12 gauge shells
The 6 Round Quick Detach Shell Holder weighs 4.7 oz.
The shells can be inserted either from the top or bottom of the shell holder
Unlike other shell holders for the Benelli M4, Remington, and Mossberg, the shot shells do not need to be removed on a regular basis