FREE Shipping on M.R.S. Alpha Rail System

Receiver Rail for Mossberg 500




Starting at: $89.20

Please Choose:



Add to Cart:


  • Description
  • Details
  • Reviews
Ships in: 1-2 business days

The Mossberg 500 series receiver rail offers a low profile receiver rail with quick detach side saddle mount. This rail will work with the Mossberg 500 and 590 shotguns manufactured after 1997. However, the tactical rail system will not accommodate the 590 shotgun platform with ghost ring sights.


Specifications of the Mossberg 500 Tactical Mount:

12 recoil stops
Just over 3 ounces in weight
Rail sits 5/16" above the receiver
Low profile tactical rail will accept any mil standard optic or red dot


Advantages of the Mossberg 500 Shotgun Rail:

Installs in less than 5 minutes
No gunsmithing required if the shotgun has drilled and tapped holes on the receiver
The only tool required is a screwdriver as the fasteners, thread locker, and instructions are included.
The channel down the low profile top rail as to provide a solid platform to attach any mil standard M1913 optic or red dot.
The rail provides the platform for our innovative quick detach shell holder. With one push of a button, the shell holder is removable. This provides the ability to change load requirements in seconds.
The quick detach shell holder, even if choosing the 8 round shell capacity, will not cover the serial number.
The 5 round IRSM shell holders provide a means to attach a weapon mounted light to the shotgun.
There are multiple options for shell holders, including 5, 6, and 8 round capacities.
The rails are finished with a Type III hard black anodize.


Quick Detach Shell Holder

The Quick Detach Shell Holders can only be used on our Benelli M4, Mossberg, and Remington products due to the proprietary dock.
The Quick Detach Shell Holder uses a slide-locking system that gives the user the ability to remove the shell holder body in seconds with no tools. Removing the shell holder simply requires pushing down on the lock bar and sliding the shell holder body back 1/2" on the slide.


Integrated Rail Shell Module (IRSM)

The 5 round shell holders with integrated rail permits a high mount location for a light so sits above the support hand. Ideally the IRSM fits with the Standard and Extended Short Rails for Benelli M4 and Mossberg Low Profile Receiver Rail.


Advantages of the Quick Detach Shell Holders

Quick access to the trigger take down pin
Finished with a Type III hard black anodize
Multiple shell holders can be staged with different load requirements
The shell holders are easier and quicker to remove for safer storage of the shotgun
Used for 12 gauge shells
The 6 Round Quick Detach Shell Holder weighs 4.7 oz.
The shells can be inserted either from the top or bottom of the shell holder
Unlike other shell holders for the Benelli M4 and Mossberg, the shot shells do not need to be removed on a regular basis


  • Model: 55152
  • 5 Units in Stock
  • Manufactured by: Asgard Defense Systems

Be the first to write a review.  Write a Review.